Re: Dual quad idle circuit question

[for26hemi@xxxxxxx]

==========================================================
Extra! Extra! Read all about it! Get the latest weather,
sports, and lifestyle news you can't afford to miss, all
at a price you can afford to pay!  Click now!
caaa9eYb7yoMza/TopOffers
==========================================================

Wally,
    I believe front and rear carbs both have idle  circuits, mixture 
screws,and air bypass screws...so they must both feed the  manifold at idle. Even the 
six packs used idle circuits, the factory set the  screws and plugged the 
holes. I have a set of '59 carbs that appear to be set up  to idle front and rear, 
but as you stated it runs on the primary rear barrels  initialy...then the 
front primaries,then both sets of rear barrels. Hope this  helps. Dan

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.