From: Dodger7998@xxxxxxx
Reply-To: 1962to1965mopars@xxxxxxxxxx
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: Engine disassembly for storage questions
Date: Sun, 18 Apr 2004 16:47:28 EDT
===========================================================
Your opinion counts! We?re conducting a survey for a
computer service/repair company. When you complete our
survey, you will also be entered into a drawing for one of
ten $100 prizes. Just click
caab8K4bWhUNma/ Val Rad
===========================================================
Unless we are talking about an engine that has started to be reassembled, I
do not like to seal them up, have found that dust or dirt causes less
problems
than trapped moisture, ...............after dissasemblly, I like to w ipe
all
machined surfaces with a coat of axle grease, I also like to store the
crank
in its original position(inside the main caps) then store the block upside
down, covering with an old sheet or what ever, not plastic.
dodger
--
[Non-text portions of this message have been removed]
===========================================================
$6.95 .com Domain Name Sale!
Limited Time! ICANN Accredited GoDaddy!
caab8LhbWhUNmf/ GoDaddy
===========================================================
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect
your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.