Poly Deck Height

[Nick Tiberio <furyus63@xxxxxxxxxxxxx>]

===========================================================
Your opinion counts! We?re conducting a survey for a 
computer service/repair company. When you complete our 
survey, you will also be entered into a drawing for one of 
ten $100 prizes. Just click
caab8K1b7yoMza/ Val Rad
===========================================================

I have an old spec sheet that list the following;

60  318  all      head cc  71.6  .003  above deck
61  318  all      head cc  71.6  .003  above deck
62  318  4-bbl  head cc  66.5  .003  above deck  
62  318  2-bbl  head cc  73.6  .003  above deck
63  318           head cc  71.6  .012  above deck 
64  318           head cc  71.6  .003  above deck
65  318           head cc  70.6  .012  above deck
66  318           head cc  70.6  .012  above deck

Even though all specs are for the 318, does this mean there are different heads or pistons for different years? Can heads from a 65-66 be put on a 63 without machining? .003 to .012 is a lot of piston.

Nick Tiberio
63 Fury 

--
[Non-text portions of this message have been removed]

===========================================================
$6.95 .com Domain Name Sale! 
Limited Time! ICANN Accredited GoDaddy! 
caab7pQb7yoMzf/ GoDaddy
===========================================================

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.