Re: INTAKE MANIFOLDS

[Larry <ltny@xxxxxxxxxxx>]

===========================================================
Bounces like rubber! Shatters like ceramic! Discover Crazy 
Aaron's Thinking Putty in grown up handfuls. It's the 
creativity unleashing, mood enhancing desk toy!
caab7pJb7yoMza/ Crazy Aaron Enterprises
===========================================================

I think I read that Mopar makes all the intakes now for B engines and if you have an RB, you have to use their spacers.  They do have spacers to adapt the B intake to the RB engine.


> 
> From: rgardian@xxxxxxxxxxxxx
> Date: 2004/04/07 Wed PM 08:13:22 CDT
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: INTAKE MANIFOLDS
> 
> 
> ===========================================================
> Let University of Phoenix make 2004 your year. Evening, 
> weekend or FlexNet® classes – over 130 locations. Look 
> into our programs and get the degree that gets you going!
> caab6aBb6A01ha/ UOP
> ===========================================================
> 
> 
> 
> 
> > OK, I guess it's time to go to the experts for a little help.  I recently bought what was represented to be an M1 alum intake for RB engines for the 426 W.  It has "mopar" cast into the front runner with P4532060 stamped on the carb base.  I took the old cast iron manifold off - and guess what?  The new one is not wide enough by about 3/4 inch.  Each side fits nicely to the head, but not both at the same time.  Also, the new gasket (fiber) only has the intake ports open.  The old one is steel and is one piece with the vally cover and has a middle opening for the carb choke (?).  Any ideas of what I have and what I need to get to correctly fit will be appreciated.  The 426 is a warranty replacement engine in a 65 Sport Fury.  Thanks,
> 
> Roger/Atlanta
> 65 Sport Fury 426W
>   > 
> > 
> > ===========================================================
> > Sign up to get FREE information from leading colleges!
> > Compare degrees, admissions, financial aid and more.
> > Study your career education options at 
> > Collegeinformation.info. 
> > caab6aib3ohRXa/ College Info
> > ===========================================================
> > 
> > 
> > 
> > I am going to put a 318 Poly motor into a 71 Duster. I have read that one of the bellhousing bolts won't match up with the nerwer style trans. I wan't to use a manual trans, and am wondering if I should use a 62-65 trans aswell as the poly 318. 
> > 
> > --
> > [Non-text portions of this message have been removed]
> > 
> > ===========================================================
> > Your opinion counts! We’re conducting a survey for a 
> > computer service/repair company. When you complete our 
> > survey, you will also be entered into a drawing for one of 
> > ten $100 prizes. Just click
> > caab6Pib3ohRXf/ Val Rad
> > ===========================================================
> > ----
> > Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> > 
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> > 
> > 
> > 
> 
> ===========================================================
> Your opinion counts! We’re conducting a survey for a 
> computer service/repair company. When you complete our 
> survey, you will also be entered into a drawing for one of 
> ten $100 prizes. Just click
> caab6PVb6A01hf/ Val Rad
> ===========================================================
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
> 

===========================================================
Your opinion counts! We?re conducting a survey for a 
computer service/repair company. When you complete our 
survey, you will also be entered into a drawing for one of 
ten $100 prizes. Just click
caab6Pib7yoMzf/ Val Rad
===========================================================
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.