Re: Fuel sender sock

[Donald Schrader <schrader@xxxxxxxxxxxxxxxx>]

===========================================================
Your opinion counts! We?re conducting a survey for a 
computer service/repair company. When you complete our 
survey, you will also be entered into a drawing for one of 
ten $100 prizes. Just click
caab6PVb7yoMza/ Val Rad
===========================================================
Changing  cam bearings is still a machine shop process as they have to have
both ends of the block open . usually done on a complete rebuild .

you can look at the bearings to check wear. providing you have the cam out.
 not required when just changing cams.

Don S.
----- Original Message ----- 
From: "Kevin Merkley" <krmerkley@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Saturday, April 10, 2004 3:00 PM
Subject: Fuel sender sock


===========================================================
Your opinion counts! We're conducting a survey for a
computer service/repair company. When you complete our
survey, you will also be entered into a drawing for one of
ten $100 prizes. Just click
caab6PVbWmGYRa/ Val Rad
===========================================================
Hi,

A year or two ago it was discussed what type of sock could replace the
one on the sending units for the 62-65 cars.  Could someone remind me of
where the replacement sock could come from?

btw, I'm still waiting for a reponse to my questions about the
replacement of cam bearings in a Poly and how hard that is to do.

Thanks.


Kevin R. Merkley
Thunder Bay, Ontario
64 Dodge 440 2dr HT (Cdn)

===========================================================
Bounces like rubber! Shatters like ceramic! Discover Crazy
Aaron's Thinking Putty in grown up handfuls. It's the
creativity unleashing, mood enhancing desk toy!
caab7pJbWmGYRf/ Crazy Aaron Enterprises
===========================================================

----
Please address private mail -- mail of interest to only one person -- 
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

===========================================================
$6.95 .com Domain Name Sale! 
Limited Time! ICANN Accredited GoDaddy! 
caab7pQb7yoMzf/ GoDaddy
===========================================================

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.