Second time around

[Dodger7998@xxxxxxx]

===========================================================
Your opinion counts! We?re conducting a survey for a 
computer service/repair company. When you complete our 
survey, you will also be entered into a drawing for one of 
ten $100 prizes. Just click
caab6Pib7yoMza/ Val Rad
===========================================================

I posed this question the other day but got no comments on it,  any 
thoughts???


Okay here we go,,,,,,,,,,340s wind up quicker than a 360 (because of shorter 
stroke)? 360s have more torque than a 340 (longer stroke more cubes)? In a 
lighter car, the quicker winding engine will probably win in a short race (1/8 
maybe 1/4 mile).? 318 and 360 used engines are cheap, if not free compared to 
the 340s.
? In the chevys, they make an oversize main bearing to accommodate a smaller 
journal crank into a larger main block (creating a stroker engine) by any 
chance is the same type part available for the mopars????????????? In other words 
do we have the ability to take a cheap 360 block, bore it 40 thousands 
oversize, grab a set of used 340 pistons that someone is ready to throw away after 
their rebuild on their high dollar engine, then go to the junkyard, and grab a 
318 crank and rods, hang the 340 pistons on it slap this all together in the 
360 block, and end up with a high reving? 340 cubic inch engine with the heavier 
webbed 360 mains.
And while the mind is still idle what about the use of a 360 crank with the 
mains turned down to fit in to a 318 block, can the skirts of the pistons be 
trimmed to clear the counter weights, would make one heck of a tow vehicle 
engine.
??? Well what is the consensus, to much caffeine?
??????????????????????????????????????????????????????????????????????????????
?? dodger

--
[Non-text portions of this message have been removed]

===========================================================
Sign up to get FREE information from leading colleges!
Compare degrees, admissions, financial aid and more.
Study your career education options at 
Collegeinformation.info. 
caab6aib7yoMzf/ College Info
===========================================================


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.