========================================================== Extra! Extra! Read all about it! Get the latest weather, sports, and lifestyle news you can't afford to miss, all at a price you can afford to pay! Click now! caaa9eYb7yoMza/TopOffers ========================================================== I usually use a sharpie and mark where the washers are before I take the hood off. Then I can get it exactly the same as it was. WHen I dont have that, I usually start in the middle of the slot on both sided. This is probably in a book somewhere, but this is how I do it. Tighten the front bolt first, then lift up on the hood and tighten the second bolt. Slowly take the hood down and look for any contact points. If there are any adjust each side accordingy. Do not let it drop closed as it can chip your paint away. Once you get aligned side-side if it is riding too low by the wind-shield, you can loosen the back bolt and let a little of the play out that you propped into it by lifting the hood when you tightened it the first time. If it is too high, loosen the front bolt and try to push down on the hood. On Thu, 25 Mar 2004 19:55:05 -0800, "Robert neal zimmerman" <northwestweirdo@xxxxxxxxxxx> said: > =========================================================== > Are you looking for savings on products you use everyday? > Visit Quality Health today and see the coupons, free > samples and special offers our members enjoy each and > everyday. > caab3ozbVb6jBa/ Ivo Interactive > =========================================================== > > Any body had great sucess with hood alignment, is it me or the springs? > Any cool tips for getting that hood to sit flat? > Neal Zmmerman,Eugene oregon > > -- > http://www.fastmail.fm - Choose from over 50 domains or use your own > > =========================================================== > Menthol Smokers Only! Click on the link below and > register to receive up to $50 in savings from one of > America's leading menthol brands. > caab4S3bVb6jBf/ Lorillard > =========================================================== > > ---- > Please address private mail -- mail of interest to only one person -- > directly to that person. I.e., send parts/car transactions and > negotiations as well as other personal messages only to the intended > recipient, not to the Clubhouse public address. This practice will > protect your privacy, reduce the total volume of mail and fine tune the > content signal to Mopar topic. Thanks! > > '62 to '65 Mopar Clubhouse Discussion Guidelines: > http://www.1962to1965mopar.ornocar.org/mletiq.html. > Tom 65 Dart GT 'vert 68 Plymouth 'vert Longmont, CO -- http://www.fastmail.fm - One of many happy users: http://www.fastmail.fm/docs/quotes.html ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. b7yoMz.