RE: 65 B body trim

[threecarb65@xxxxxxx]

John,you are a lucky man,65 Coronet 500,most beautiful car ever! The trim issue for me took place years ago,so I am going by memory ( we are doomed}I do know that the roof trim has a stud and nut that has to be removed,located on the rear roof pillar and the headliner must betaken loose.The trim that runs above the doors is the worst to remove just plain nasty! Seems I used two old butter knives with the ends bent slightly. These clips were designed to hold the trim solid and they were designed TOO GOOD.NASTY just NASTY.Lots of patience required. The 65 Coronet factory manual says... " Exterior moldings are held in place by numerous clips "T" bolts,brackets and by plastic retainers" not much help.I believe you have to start at the back and work your way forward towards the windshield trim,more butter knife,bingo! it's all off and it only took a weekend.Good luck,Stan

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.