Re: {Chrysler 300} 1962 413 Fun

It won't hurt anything, but if it bothers you, turn the car upside down and shake it.

On Wed, Oct 28, 2026, 7:52 PM 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

I am removing my valve covers off my 413.
This is in anticipation of my master mechanic neighbor coming to help me.
I need his brain to help me measure & verify if my pushrods are the proper length or not.

Anyways….
In pulling the nuts & washer hardware off the passenger side valve cover….
One of the washers slid out of my hand and into the half-moon void where the intake manifold meets the head.
Ugh!

I don’t recall what goes on inside that half-moon cutout.
The question is…
Do I now need to pull the intake and fish out that washer?
Or can I leave down in there?

<F0001230-C320-4AF5-B968-D10253BFDAD2-IMG_3769.jpeg>

Thanks!

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/C3F6121D-7C8F-4582-AB08-0E3892D016C5%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFNX_HeZcxo-JE11cjuR6e1P-3y_Frjzj7Ox%3DFrz8k4RpQ%40mail.gmail.com.

<F0001230-C320-4AF5-B968-D10253BFDAD2-IMG_3769.jpeg>