RE: {Chrysler 300} 1962 Heater & A/C Box Polishing

["larry.pwb via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Not sure if the 62 is made from the same material as my 58 but if it is

I would sand it & spray it with  clear paint

Here’s what mine looks like after 12 years  using that method

These parts were white from the sun when I found them     ↓

 

 

 

Larry

 

From: 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Saturday, May 16, 2026 1:41 PM
To: Chrysler 300 Club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 1962 Heater & A/C Box Polishing

 

Who likes what method to make the fiberglass(?) boxes look nice and clean and shiny?

 

Thanks!

Matt Allyn

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/E89B5D41-4E35-4D4D-96E7-6AC16033FE28%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/!%26!AAAAAAAAAAAuAAAAAAAAAF79BAeNNBZMnuZ5nfhqxlEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAADERbPuAPZ3TIG04xN5vQvUAQAAAAA%3D%40yahoo.com.