I second that outfit, they are great for any cable operated thing I personally do not understand what can go wrong with a trans cable? new covering , shrink tube won't leak like stock does . Lube inner part w 75 W . I nean nothing can go wrong ? Problems happen with the flat springs in PB assembly , retention of cable there poor adjustment. I believe it has a certain lash designed into it such that when correctly adjusted spring the on rooster comb tends to center valve in index locations . If adjusted against one side that action is inhibited leading to occasional fail to engage . For that reason I avoid factory instruction ( hows that work for you ? dog!!) Use test bulb or meter to ground on N switch Slide till bulb goes out to left then right , center N in middle. Has to be right on Learned a lot on this , once I made myself an adaption of push buttons to late torqueflite , measured all this , getting OD from dodge truck into F . Lot of work, no park ( all that had to go) Not worth it vs putting Hurst shift in F console at ash tray . Looks like 4 sod F ! 62 - 64 TF has lighter spring in rooster comb for PB , later spring too heavy
On May 4, 2026, at 2:10 PM, Bob Merritt <Bob@xxxxxxxxxxxxx> wrote:
The list Pete refers to is our Parts and Vendor source list
http://simplexco.com/auto/sourcelist/sources.htm
You might want to book mark that page.
If you were to search for Cables
you would find 47 matches which include
|
Cables
|
Al Weaver, 5162 Gardena Ave., San Diego,
CA 92110. (619) 275-0088. Rebuild and repair of
transmission cables. {06/04}
|
|
Cables
|
Contemporary Automotive, 5020 Cook Rd.,
Beltsville, MD, 20705. 301-937-4541. http://contemporaryautomotive.com Has
the cables for the swivel seats early Mopar.
|
|
Cables
|
Control Cables, Inc. 9816 Alburtis Ave.
Santa Fe Springs, CA 90670. (562) 949-0455. Custom
fabrication of cables. http://www.controlcables.com/ {10/16}
|
|
Cables
|
Imperial Services, www.imperialservices.net Motor mounts
& transmission mounts. Also speedometer tach cables
and transmission shifter cables. See Murray Park to order.
|
Need more info, give me a shout.
Hiho
On 5/4/2026 1:46 PM, ' pffkllc@xxxxxxx'
via Chrysler 300 Club International wrote:
Make sure this outfit is included in our list of parts suppliers
with a reference to the transmission shift cables.
Pete Fitch
On
Monday, May 4, 2026, 1:31 PM, Nick Taylor
<nicksgaragesd@xxxxxxxxx> wrote:
I'm replying to this to pop it back up in the feed for
Matt Allyn as maybe this company can make him a new shift
cable that works.
I ended up buying the 300K from Lee, along with the new
console shift cables.
On Monday, January
15, 2024 at 10:08:42 AM UTC-8 cpaviper wrote:
Here's
a Facebook posting by a Lee Meyer, K Ram owner,
that may be of interest -
I
recently was dreading getting transmission
cables replaced or rebuilt for my 300 Ram K. I
am pretty tired of the small amount of vendors
that sell or rebuild parts for these old mopars,
because of costs, poor quality, waiting years
for things etc. So, a friend of mine who is a
race car guy recommended this company in Santa
Fe Springs CA that make control cables for race
cars, boats and whatever. I sent them my shifter
and park cables and the guy says no sweat. ONE
WEEK later i had my new cables and they are spot
on perfect better than factory by a mile. Pretty
much an impossible feat for these chryslers. So,
tell the other guys (you all know who they are)
to pack sand and call these dudes. Control
Cables Inc 562-949-0455 www.controlcables.com
Lee's
photos are attached.
Noel
![Trans cables - Facebook post.jpg]() ![Trans cables - 2.jpg]()
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the
Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/2aa0cda2-8e30-4f10-9088-0e6b828b090dn%40googlegroups.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google
Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1932099148.3952585.1777916807735%40mail.yahoo.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/7c374f35-5117-424f-a464-92c8ab2444e3%40simplexco.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/A5605AF0-2754-4C36-BD22-4C38728DCB95%40gradyresearch.com.
|
Back to the Home of the Forward Look Network
Archive Sitemap