{Chrysler 300} O-Ring for '63 Chrysler Transmission

[<mplindahl@xxxxxxxxxxxxx>]

Hello All,

 

Does anyone have the exact size of the rubber O-ring that fits on the dip stick tube?  I am having this replaced by a local mechanic and I would like to bring him the O-ring before the tube is removed and all the trans fluid flows out of the hole.

Your help is appreciated.  Thank you!

 

Regards,

Mark Lindahl

’63 300 Conv.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/055401dcdc02%24f4e75980%24deb60c80%24%40sbcglobal.net.