Re: {Chrysler 300} P/S Pump Bracket

["Gary" <garythepartsdoc@xxxxxxxxxxxx>]

Hi All in Mopar land,

 

I have a GOOD used ‘59 and later, power steering pump w/ bracket to sell, reservoir 5” OD +-. This pump fits many years and makes Chrysler products. Turns over freely and goes, blup, blup when turned. I guarantee it will work, or money back. There are no signs it was leaking as the exterior body shows little oil/ dirt. My guess, it was a early take-off. it has a large OD pulley, swap w/ your pulley and good to go. I can get a photo. $100 + 15. large flat rate in the lower 48.

 

Take Care,

Gary Nelson
760.751.1958

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/6811303D96CC40528657403E9067510D%40OwnerPC.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1E337F3A89E04BF39C0CE9387965586F%40OwnerPC.