{Chrysler 300} 64 steering wheel fitment

[David Dumais <ddume300@xxxxxxxxx>]

Good news about the steer wheel issue.

I talked with Steering wheel Bob/John with contact issue with horn wire on hub rubbing on canceling switch bolt head.

He mentioned that the clearances should be checked when installing replacement wheels.

I used two separate coils from a brake hold spring for spacing the inside copper ring above the screw head.

Successful,  the directional switch works and the thickness was .014" which raised the wheel .

Imagine that. No more Horney K!

Alls well.

Dave D

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAJp4EVFoRE804J0xFoqB6ARwVt9aQX2Ns-4KNN%2BcdD__OUZyfA%40mail.gmail.com.