{Chrysler 300} 64 300 steering wheel install

[David Dumais <ddume300@xxxxxxxxx>]

Hello All,

On the back of the 64:steering wheel is the copper disc, with horn wire attached to it.

When I torque it to 24 ft/ lbs, the connection rubs on the directional switch screw head.

Made sure black wire to copper ring is below rotating surface.

Still rubbing.  All components inside the upper shaft hub are secured in place.

Is there supposed to be a spacer below the wheel hub end for height adjustment?

Thanks

Dave D

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAJp4EVH-poi_wOhq%3Dj1pD%3Dz9E%2BAwGd7eWCfC_ejyORGEZuCgkA%40mail.gmail.com.