{Chrysler 300} Re: Stewart Warner tach resto shop?

[Kurt Brueske <kurt.brueske@xxxxxxxxx>]

Mo-ma Manufacturing - highly recommended, very reasonable price wise.

https://momamanufacturing.com

Kurt

On Wednesday, March 25, 2026 at 4:49:00 PM UTC-5 keith_a_lang wrote:

Hi Folks

The tach in my ‘64 R2 GT Hawk works intermittently and needs to be gone through and the inside bezel also needs to be repainted (the dial itself is fine.) It is quite different from the mechanically driven tachs found in our Letter cars and JC Auto isn’t comfortable doing it as the SW glass and bezel are crimped on and can be tricky (I trust Jeff and appreciate his honesty!)

Can anyone recommend a shop that might be a good fit for this? I’ve just reached out to West Valley Instruments in Reseda, CA as someone i met at the Amelia concours a few weeks ago suggested them but I am soliciting other suggestions as well.

Thanks in advance,

Keith

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/929d0f4f-769d-44a5-9148-d94109a4291fn%40googlegroups.com.