Re: Re: {Chrysler 300} Need Rear Axle Seals for 62 300H

Thank you all for the information. It has been a great help. I bought it knowing that it needed work and trailored it home.

Once digging into it found a host of small and big problems that we are plowing through.

New fuel line to replace the rubber hose, Inline Tube, and worked perfectly.

New brake lines, again Inline Tube, and worked perfectly. Now have working brakes.

New rear trans seal

Replaced the broken parking brake cable and drum assembly, which I had.

Had to find new air cleaners, stolen from previous owner. Big shout out to Kurt Brueske for helping me out there.

Rear carb is missing choke and heat tube assembly missing. Any help with that would be greatly appreciated.

A whole list more, but I have the majority of major parts to get back to looking great. I can go on. I will post some photos in a bit.

Ron

On Mon, Mar 23, 2026 at 7:35 AM <msgcot2@xxxxxxxxxxx> wrote:

Try NAPA, I have gotten many parts from them
Stanley Cotler

------ Original Message ------
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx
To: ronszarz@xxxxxxxxx Cc: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Sent: Sunday, March 22nd 2026, 08:34
Subject: Re: {Chrysler 300} Need Rear Axle Seals for 62 300H
Hi Ron

If you go to the club website tech department and scroll down you will see a section of part numbers for Napa. Here is the link for 300H. The “Bearings and Seals” heading contains some information for you.

1962 Chrysler 300H NAPA part numbers currently on file 2-20-2000
chrysler300club.com

D&K

Sent from my iPhone

On Mar 22, 2026, at 06:42, Ron Szarzynski <ronszarz@xxxxxxxxx> wrote:

Does anyone know what the part number is for the correct rear axle seal for a 62 300H? I have one that is leaking and needs replacing.

Where can you purchase them from?

I also need the rear dif seal.

Ron Szarzynski

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to unsubscribe@xxxxxxxxxxxxxxxx">chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CANvseORfm7PBsQQAD-CkHo3ko4f8r2DKS%2B%3DLNW_m5xT9igsP%2BQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to unsubscribe@xxxxxxxxxxxxxxxx">chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/413338ED-D071-44B4-96AC-3B049A4674CB%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/96b0ffc.fcb.19d1ab16983.Webtop.126%40optimum.net.