{Chrysler 300} Corbin clamps

[Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>]

Make sure you use the perfect size of Corbin clamp or it will leak. Take a caliper and measure the OD of the relaxed hose that you wish to clamp. Note the number of sixteenths of an inch on the caliper and that will be exactly the correct number stamped on the Corbin clamp that will seal the hose to the nipple properly.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CABYqBVo4ghn55Ub67_9Zq%3DE8hwN7jFnT-jjSAK99PKy49XTjBw%40mail.gmail.com.