Re: {Chrysler 300} Aluminum inserts for F door panels

["'dave mason' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

The club store did have some of those aluminum inserts, made in Sweden to exact concours.  Not sure if they still do.  Once they are gone, I don’t think any more will be made (the factory burned down I believe)…

Sent from my iPhone

On Feb 17, 2026, at 14:16, Frank & Cathy Messina <hemicuda472@xxxxxxxxxxxxx> wrote:



Hi club members. Is there a source for the aluminum grained inserts 

on the F door panels?

     Thanks

FRANK MESSINA

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/544651912.1406056.1771355688559%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/0B0CA200-38B5-4E41-9231-C632ADA75472%40yahoo.com.