Re: {Chrysler 300} 1960 Power Antenna

[Marshall Larson <granitledge@xxxxxxxxx>]

I just checked my F and I see that there are two opposing shallow holes in the upper ring of the bezel. I ground the point from a 6D finish nail and used it as a lever inserted into one of the holes. It didn't take much effort to turn the bezel loose. If one doesn't work then try using both holes.

On Wed, Feb 11, 2026 at 1:55 PM 'Charles Kreszock' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

How do I remove the rear power antenna from the trunk of a 300F?

Mick

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAN56HYU%2BQCmQcRsfVcqtfwLc2JyAMJtz6-9yMdcXxndda7u8Uw%40mail.gmail.com.

--

Marshall Larson

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACuDFNSw5Rimq%3DR0E8O-bvg6T8KnWZVZZUxj%2BsFvrYopwD_7xA%40mail.gmail.com.