{Chrysler 300} Choke question

["'Jay Williamson' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I have a 300 F that has always been a hard starter. I noticed that my choke is wide open, so I purchased a new choke mechanism and removed the thick carb base gasket. This is a picture with no base gasket and the choke butterfly closed. Notice the difference I still need to insert the choke rod into the choke. Any ideas on how to correct this? Thanks

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/24F94A14-9822-47AE-BC0B-027EAFE61203%40icloud.com.

Jay Williamson
317-223-1379

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/24F94A14-9822-47AE-BC0B-027EAFE61203%40icloud.com.