Re: {Chrysler 300} POp Riveting Trim

John,

Thank you for that tip!! I ordered a box because I have a 1969 Chrysler 2-door hardtop and will need to replace several rusted away studs around the rear window, and side molding studs when the quarters are replaced.

Merry Christmas and Happy New Year!

Jim Daniel

On Wed, Dec 17, 2025, 10:30 AM William Huff <whuff@xxxxxxxxxx> wrote:

Thanks, maybe will give that a try before rivets. Auveco doesn't do retail. I found them at Auto World Tool...$9.97 each. Ouch. Then I found them at Auto Zone, $18.00 for 100 quantity delivered. Crazy. Anyway thanks again.

Bill Huff

On 12/17/2025 7:54 AM, John W Sager wrote:

II used these to replace the some of the rivets on my '70 300 convertible. Auveco #9877

. 4-24 x 3/8" steel special phillips flat Works perfectly. Don't use pop rivets.

John

On Tuesday, December 16, 2025 at 09:25:55 PM EST, William Huff <whuff@xxxxxxxxxx> wrote:

I am ready to install the rocker trim on the 1970 300 convertible.
After replacing sheet metal, some of the little flat headed rivets that
the plastic trim mounts clip onto are no longer there. I am considering
pop riveting the plastic pieces onto the body.

The metal has been repainted and the metal treated inside and sealed up,
so I would rather not try to weld new mounts to the car. My big question
is what method to use to rust proof the rivet holes? I will use
aluminum rivets. RTV crossed my mind, but not sure of the longevity.

Thanks,

Bill Huff

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.

To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/b4c6644d-1d99-4e3c-b595-b073966d8927%40cfl.rr.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/73a2ad9e-a22f-4a44-9428-a31f1ce4bb07%40cfl.rr.com.