RE: {Chrysler 300} Intake manifold insulation

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I think they are just oil and fuel sponges myself. I prefer to leave it all out and to wrap the fuel lines…

 

One could in theory have the bottom the intake manifold coated with some of that eat reflective coatings and get the same thing out of it without the insulation….

 

James

 

From: 'ALLAN POZDOL' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Monday, June 9, 2025 10:56
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} Intake manifold insulation

 

What are opinions on using the insulation between the intake manifold and the valley pan? 

Most seem to end up missing, like mine did with only a remnant remaining.

 

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/596769106.99553.1749491730575%40connect.xfinity.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617129F2CF084C754FF94D4D936BA%40CY5PR19MB6171.namprd19.prod.outlook.com.