RE: {Chrysler 300} Throttle shaft bushings

On the 300K I used a stock one and used some plastic-metal epoxy and glued it into the bracket. I used a drift to keep it expanded until it dried. Has worked fine.

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of John Grady
Sent: Friday, February 7, 2025 05:59
To: Nick Taylor <nicksgaragesd@xxxxxxxxx>
Cc: Club International Chrysler <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Throttle shaft bushings

hi , i know this problem . Especially involving torque-flight setting. on kick down

i made new ones of bronze by a machine shop , plastic is no good although Delrin would work ..

Forget stock ..

On Feb 6, 2025, at 8:49 PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

Where are people sourcing these? Put a new one in a couple years ago and now it's breaking up.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMaRtDxmNPzC4nx1_5Nui%2BKEQMVDq-nB-L7Xq4gfVNc5g%40mail.gmail.com.

<Screenshot_20250206_171917_eBay.jpg>

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/32AD9AD6-65E3-4E42-A47F-5FBD1DAE3172%40gradyresearch.com.