{Chrysler 300} 300 F trim

["'Jay Williamson' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hello group,

I recently purchased a 1960 F and have been working hard to get the car ready for car show season. I am getting ready to send the car out for paint in the next two weeks and I would like to remove the trim before it leaves for paint. I have scanned both the Chrysler shop manual and 300 F supplement and have not found any info that covers this.
I know that I will need to remove the rear inside panels to get to the trim nuts, but can anyone tell me if there are also clips and what type of clips they are and where they are located? I don’t want to pry the wrong way and bend the trim. If you have removed trim and have pictures, that would be great.
I’m sure I will have plenty of other questions for the group, but for now, thank you for your help.
Jay Williamson
317-223-1379

Sent from my iPad

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/84718144-6FAB-4549-92CC-3AD52D5738A8%40icloud.com.