Re: {Chrysler 300} Pistons for 1960 Chrysler 413

[Kevin deGraauw <kdegraauw@xxxxxxxxxxx>]

Egge is the only ones still making these for a 413 off the shelf and in std and the usual oversize bores. A bit pricey but very decent quality. Basically it's a custom piston more or less- about 850 a set. Anything used is exactly that- used. Good luck with your search!

Kevin

Get Outlook for Android

---

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of jegert930 <jegert930@xxxxxxxxx>
Sent: Wednesday, January 22, 2025 11:39:40 AM
To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Pistons for 1960 Chrysler 413

 

I am looking for a new set of pistons for a 1960 Chyrsler 413. Does anyone have any new old stock or new pistons that have not been used? If so please advise cost and availability. 

Thanks

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/8d763d8d-4545-45e2-b62f-6c57d8b863fen%40googlegroups.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CH3P220MB1981C0385101ADDA0D4AC86BB2E12%40CH3P220MB1981.NAMP220.PROD.OUTLOOK.COM.