{Chrysler 300} 300g starter and antenna

[Michael Marmorale <michael@xxxxxxxxxxxxx>]

Hello everyone I finally got to rebuilding the starter in the 300g.  The starter died at Carlisle, I took it out and a great guy in the swap meet area took it apart and cleaned it up for me.   So it’s out at the rebuilders.  Is there a metal gasket that goes between the bell housing and the starter?  If there is does anyone have one? 
On the antenna I have a power rear antenna.  Does anyone have the top antenna collar that sits on top of the assembly but under the sheet metal of the car?  Or does anyone know the dimensions that I can have one 3-d printed?  

Thanks Mike. 


Michael Marmorale

Sent from my iPhone
Please excuse errors.  

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/70C3D427-DE24-4BC9-B14D-FEFB7F7B1A2A%40marmorale.com.