{Chrysler 300} 300C radio

[John Grady <jkg@xxxxxxxxxxxxxxxxx>]

new output transistor and added resistor  200 ohm 5 watt to correct the bias .—one end is soldered  to chassis  metal not collector metal  .
E of new transistor goes to  existing 0. 27 ohm resistor , B goes to 2 nd lead on terminal strip that is not connected to the heatsink ( C is case , makes connection when you mount it  ) set bias per instruction on print 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/9C21AC20-3D4D-4F71-B43C-A3B40F7B700D%40gradyresearch.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/9C21AC20-3D4D-4F71-B43C-A3B40F7B700D%40gradyresearch.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/9C21AC20-3D4D-4F71-B43C-A3B40F7B700D%40gradyresearch.com.