RE: {Chrysler 300} Speakers 300K
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: {Chrysler 300} Speakers 300K



Hey Bob.

 

I have see this unit. The question is does it fit as a rear speaker in the 300K seat center assembly.

 

James

 

From: Bob Jasinski <rpjasin@xxxxxxxxxxx>
Sent: Saturday, December 7, 2024 09:31
To: James Douglas <jdd@xxxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: RE: {Chrysler 300} Speakers 300K

 

This 6 x 9 is designed to fit in a tight area without the protruding bottom magnet. It is dual voice coil and tweeters. I have one and like it.  They make smaller versions as well.

 

https://www.amazon.com/RetroSound-R-69UK-Replacement-Speaker-Vehicles/dp/B00M9BC0S8/ref=sr_1_3?dib=eyJ2IjoiMSJ9.VgWbWNSHEV3rXn1D4lmURZWvyh6SbrkeTdRraB-dZedteKrBqL1lewC4CWr5jINF56N8899u7c5VaBY3lSjsZDd1lgoBvJeajUUysCJC8FMo1ybIJQOPBSJxMTrst_XYGnc8cDNhaA4pryO_Y7akhXQ8S4c3L7pGrYLsUaSFCUybCHyXDmuRdHlnxmAVlhlea8CAt2m0MNEAosvTNobEJGadOdZ-Z9zEehhAJdWVRm8.vnM4k3Nd8hQBRWKPUShvoTtbVMA2npOBb6FxDnCi97M&dib_tag=se&keywords=6x9%2Bretro%2Bsound%2Bspeaker&qid=1733592310&sr=8-3&th=1

 

Bob J

 

From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Friday, December 6, 2024 3:31 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} Speakers 300K

 

Hi All,

 

I am working on the sound system for the 300K. I am going to get the Aurora conversion for my AM radio.

 

The front speaker hole is large enough to house the below I think:

 

https://garytayman.com/abante/index.php?rt=product/product&path=36_38&product_id=50

 

My question is on the rear.  Does anyone have any photos of the rear speaker in the housing sitting on the rear seatback and any photos to show if there is a hole in the carboard separator so the speaker can sit into the trunk area?  Or, did the factory speaker fit projecting forward into the 300 housing between the seats?  There is only 1.5 inch in there between the framework and the black mounting plate.

 

I am hoping that the following may fit into the rear:

https://garytayman.com/abante/index.php?rt=product/product&path=36_38&product_id=125

 

Thanks, James

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617199B7161B77E260CDA26993312%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617140B8A5A63E4A32CB8C1393322%40CY5PR19MB6171.namprd19.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.