Re: {Chrysler 300} 60-62 Console Lid
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 60-62 Console Lid




Our F , also an early May 1960 build, has no evidence of having any history or evidence of a small latch “post” on the lids or a  receiver latch on the lower bins. Both bins do have the molded in notches where a latch like that posted could have been installed (which clears up the mystery for me as to “why is this here?”) 

Keith 

On Nov 4, 2024, at 8:54 PM, 'Noel Hastalis' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:


Ditto for my F, built 5/5:60. Only my rear armrest cover has the stud/tang. I always assumed one of these armrest bases was swapped out at some point in the F’s past. 
Noel

<IMG_4807.jpeg>

Sent from my iPhone

On Nov 4, 2024, at 2:40 PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:


Not even all the 1960 cars came with them. 

My February 300F had them front and rear. My May 300F only has one in the rear. The armrest bases are molded differently as well.

On Mon, Nov 4, 2024, 12:18 PM <dplotkin@xxxxxxxxxxxxxxxxxxx> wrote:

I know a little about this. 

 

The 1960 lid uses a ball stud secured by nut to the lid which fits into a tang in the base. My car was absent these, and every specialty hardware shop I spoke to said good luck. 

 

I consulted with Gary Goers who said that it might be the hardest part to find for the car! He scrounged one up from a fella in Canada and sent it to me. I sent it to member Peter Kearing's son David who reproduced it from a 3D printer and I sent that to Bob Merritt. 

 

I attach herewith the paperwork on the item.

 

The 61 lid eliminated the ball stud and receiver for no latch at all. 

 

Dan

-----Original Message-----
From: "Joshua C Mishler" <tailfinera@xxxxxxxxx>
Sent: Monday, November 4, 2024 2:13pm
To: "Chrysler300" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 60-62 Console Lid

Hello everyone!

Need some help with identifying a console lid and container.  Are the 60-62’s all the same or do they have variations in them?  I see from the webpage on the club site there are a number of latch mechanisms for 1960, but wasn’t sure if they were same across that three year span?  Also, is the rear the same as the front?  Here is the link to photos of the one I have:
Thank you in advance for the help.
Josh
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAOf%2B2s_%2BxtYKLmkK1G63VUcbA1LSZ%3DrbVCwuZqGvu6pVRcgF3g%40mail.gmail.com.



 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1730751511.672824023%40apps.rackspace.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFPfTwJpcnODsEHZ_%3DqaJ67GXZs0tiJUe7DPuFT_ueNSEw%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/7C01810C-F239-4D69-A6F7-466FD3840AD2%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/EAB8610D-958E-406C-AB24-D3C7D95244C2%40yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.