{Chrysler 300} 300 K power seat flap

["'ALLAN POZDOL' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Cranial flatulence strike again.

 

I am putting the front seats back in, and cannot confirm the plastic cover and seat flap arrangement.

The covers for the drivers side and a flap were in the trunk when I bought the car, and I have converted the passenger seat to power as well.

 

Is the flap used with the lower plastic covers?

 

Looks like the would cover the openings on the cover, but they would stick out quite a bit it appears.

 

Anyone remember what type of screw mounts the flap wire hinge? Self tapping, as the hole for the screw was pierced. With a shoulder. or spacer?

Parts book refers to the flap on a legend but no other details.

 

Many thanks in advance.

 

Allan

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1077564264.1001552.1730407837001%40connect.xfinity.com.

Attachment: 20241031_153231_resized.jpg
Description: JPEG image