Re: {Chrysler 300} door vapor sheet

[M L <granitledge@xxxxxxxxx>]

Spray adhesive works perfectly. It will hold the plastic and the insulation, if used, in place but allows it to be removed/reattached if you need to get in the door in the future. Multiple brands available including 3M.

On Sun, Oct 20, 2024 at 5:56 PM 'ALLAN POZDOL' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

What has worked for others in regard to securing the door plastic sheet vapor barrier?

 

I see butyl rubber tape, 3M body caulk, ...........?

 

What will hold the sheets and allow any future acces into the inner sanctums?

 

Thanks!

 

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/722221636.618837.1729465010550%40connect.xfinity.com.

--

Marshall Larson

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACuDFNRd15mszf7MxzbxwgjHMUfOMMwV9UDKZX5gSY0WbB_0dA%40mail.gmail.com.