{Chrysler 300} Re: 64 Evaporator drain tube

["'ALLAN POZDOL' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Just to follow up, I did modify a Quirey drain tube #278 to fit my 64 K AC. I cut the larger bellow seal away, leaving the smaller collar to seal up to the evap case. I glued in a short piece of 1/2" OD - 3/8" ID a 1/4" down and SHAZAMM!

Drain tube city!

On 08/31/2024 12:03 PM CDT ALLAN POZDOL <apozdol@xxxxxxxxxxx> wrote:

 

 

Does anyone have a recollection of this? By now they must have all rotted away.

Was the tube originally in fact short, and draining onto the trans case up by the valve cover?

On 08/30/2024 4:07 PM CDT ALLAN POZDOL <apozdol@xxxxxxxxxxx> wrote:

 

 

I was just about to replace the AC drain tube, but the one I bought doesn't appear like it may work; much larger profile and it is pretty short so that it will drain onto the trans housing.

 

Needless to say, mine is long gone. I did get a remnant of the top of the original tube, which appears it was glued onto a barbed nipple. What was stock?

 

I can't find any reference to a drain hose in the 64 parts book, and in 63 the reference is to the rear SW drain tube 9 11/16" long.

 

What have others done? Just run a length of tubing down past the trans, no weeper at the bottom?

 

Allan

 

 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/508209361.180397.1727393561996%40connect.xfinity.com.

Attachment: 20240920_152201_resized.jpg
Description: JPEG image

Attachment: 20240920_152610_resized.jpg
Description: JPEG image