Re: {Chrysler 300} Re: 1965 300L parts

[Kevin deGraauw <kdegraauw@xxxxxxxxxxx>]

I also could use some rear trim pieces- 

- a set of super nice pit free, show quality if possible  "swirly" aluminum plates that mount behind the moldings and the one on the gas lid flap on either side of the trunk 300 medallion

- the little curved chrome molding that is on the corner of the driver's rear quarter directly above the taillight on the quarter, not the decklid. 

But these are like unobtanium, so I can dream I guess!

Kevin

Sent from my T-Mobile 4G LTE Device
Get Outlook for Android

---

From: 'John' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Thursday, September 12, 2024 2:43:38 PM
To: Chrysler 300 International Club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Re: 1965 300L parts

 

The upper & lower radiator shroud pieces were found and included the two midway connecting brackets also for the ‘65 300L. Thanks to those who helped.

I am now looking for these parts. Just need a  nice looking pair.

Below are the two rear qt. Panel lower trim parts I am looking for. They are part number 2527984 & 2527975and reference #33 in the parts book. 

I also could use a good straight trim piece that connects the upper part of the taillights and is 34” long. My has a flattened spot right in the middle. I could try to straighten it if necessary.

Regards,     John Klir (708) 724-9199

Sent from my iPhone

On Aug 9, 2024, at 12:42 PM, John <arklirj@xxxxxxxxx> wrote:

I’m looking for a radiator fan shroud for my ‘65, 413 A/C car.  I understand it’s a 2 piece part.  If anyone has one for sale please let me know.

I’m also replacing the rear bumper to body seal and I found that Detroit Muscle has a 2 piece product. I didn’t see anything in the Quirey, (misspelled probably), on line catalog. Are there other alternatives?
   Regard,   John Klir (708) 724-9199
Sent from my iPhone

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/148C8833-B727-40C5-94F4-D8CDE83B76BB%40yahoo.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/IA2P220MB19883E02C98B8D0FA8BF9C44B2642%40IA2P220MB1988.NAMP220.PROD.OUTLOOK.COM.