Re: {Chrysler 300} Brake Line Routing

On Mon, Aug 26, 2024 at 9:42 AM Zach Hietsch <zhietsch@xxxxxxxxx> wrote:

Hello All,

I am having a hard time with front brake lines.

I have replaced my front drums with discs(AAJ kit) and I keep smashing the driver side rubber line in between the spindle and the brake rotor. The calipers that I bought have the banjo bolt right in the middle of the caliper and the hoses I am using are the ones provided by AAJ. The most natural orientation is to run the line up the rotor and around the vertical part of the spindle. Because it doesn't quite fit if I go behind the spindle. Also I am not having any issues with the passenger side. Though it may just be a matter of time.

I was wondering if anyone has encountered this and what is the best way to route the lines. Would just putting a longer line fix the issue. The lines I have right now are ~18" long.

At this point I am leaning towards moving the hard mound on the frame so that I do not have to wrap the hose around the vertical part of the spindle.

--
Thanks
Zach Hietsch

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAH16hEVVaz8Bn6t%3D8YFcFksfxXKzDpDTRyVS3fb4yyirvuGBhA%40mail.gmail.com.