{Chrysler 300} Electrical Help on 300G

[mguarneri via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

The other day I was removing the speedometer cable to get it repaired.  So in doing so on my back with my hand under the dash to unscrew it, I must have done something to the wiring.  I was about to head out to a car show this morning and when starting the car, nothing!  

 

I checked to make sure I was in neutral and I was.  The courtesy as well as the lights and turn signals work.  However I noticed when I turned the key, the gas gauge usually moves and it didn't.  I did notice the amp gauge slightly moved when I turned the key as well as the parking brake light dim.  The battery is showing 12.5v.  There was no sound from the starter.  

 

When looking underneath the dash, I could not see any wire out of place or not connected.  I have no clue as to what I may have disconnect, but certainly I did something.

 

I would greatly appreciate any ideas on how to trouble shoot this.

 

John

 

PS....Just in case, does anyone know of a good mechanic in the Boston area that could work on it (I live near Portsmouth NH) just in case I need to tow it! 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1866974466.6019598.1723927547171%40mail.yahoo.com.