no one has mentioned it, but millions of these are in use on medium size straight box trucks . You can see them bolted to frame rail under the box . I had very poor results with “ expert rebuilders “ on a J . It was put together wrong when dissected third time by a truck place . locked up etc etc . Did not trust it enough to even drive car for a year . So I chased this down , truck places like International Harvester etc do many a year . J is smaller but same design and possibly same parts as a truck unit . It was 25 years ago , but my problem was solved and reasonable cost by a real pro truck mechanic . hope this helps john g On Aug 15, 2024, at 4:24 PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote: -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/6FEF5B2F-DABC-46C4-B287-9A2BAEB49579%40gradyresearch.com. |