Re[2]: {Chrysler 300} 300J/300K ram heat riser pipes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re[2]: {Chrysler 300} 300J/300K ram heat riser pipes



Coolant heated from a G means the very rare 400HP optional setup.  But different heat pipes than J and ramK.  The F/G/H 400HP-405HP headers were different as well. 

Carl


------ Original Message ------
From "RICK AND DEBBIE CLAPHAM" <rixpac@xxxxxxx>
To "Carl Bilter" <cbilter@xxxxxxxxx>; "Nick Taylor" <nicksgaragesd@xxxxxxxxx>; "chrysler-300-club-international@xxxxxxxxxxxxxxxx" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Date 7/15/2024 8:40:55 AM
Subject Re: {Chrysler 300} 300J/300K ram heat riser pipes

I have a piece from a set, purchased some years ago, with Mopar sticker.  The G we were working on had coolant heated ram manifolds.

Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of Carl Bilter <cbilter@xxxxxxxxx>
Sent: Monday, July 15, 2024 7:12:48 AM
To: Nick Taylor <nicksgaragesd@xxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 300J/300K ram heat riser pipes
 
Hi Nick,

You could block off the ports and run without the risers, for awhile, certainly for engine break in/testing/sorting, the rams will be ok, but better to have the support if the car will see a lot of driving.  
It has been discussed/debated before, but you could also leave the heat blocked once risers are in place in your temperate SoCal climate.  

Also, the header support brackets should be installed, and we have a template to facbricate those on the web page.   

Carl


------ Original Message ------
From "Nick Taylor" <nicksgaragesd@xxxxxxxxx>
To "Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Date 7/14/2024 11:14:28 PM
Subject {Chrysler 300} 300J/300K ram heat riser pipes

Bit by bit, I'm getting the parts back for my ram 300K. A few days ago, the previous owner agreed to sell me the original engine. No ram parts though but there is still hope.

One thing I didn't see in the parts he got with the car originally were the heat riser pipes that go from the exhaust headers to the intakes. I see that they aren't available although a club member had them made in the past. A new friend with a 300J needs them as well.

If you can't get them, do you just block off the ports and do without? I know they also provide some support for the intake manifolds so that might not be a viable option. I contacted a couple exhaust places and they can't try to make them without examples. The bending templates they use to make exhaust systems don't exist for the heat risers.

Thanks for any feedback.

Nick

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMp18PA%3DqukfX-d3qWv4rjCYoXt59BHoc4CeVCvRgk%2BYw%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/em6ebe5123-36a9-4cc5-a445-ef0070163c3b%40cb6e1c21.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/SA1PR20MB6146106CF332EE8926542AC1D4A12%40SA1PR20MB6146.namprd20.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/em8bc58f94-507d-46ad-b6ca-5a341372a2ca%409a09ae23.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.