Re: {Chrysler 300} 1960 brake parts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 1960 brake parts



this whining gets a little extreme . cast iron is cast iron , it is a simple part.
The only variable really is surface finish , and i doubt they get that wrong , but if worried send a hone in .
We can’t make a tv set here anymore, China is now like the US of WW 2 . Can make anything . 
Hard to believe the lack of any vision at all here , politically , about   keeping our once world leading infrastructure intact . Why we won WW 2 . It’s gone . Lawyers and politicians in charge , can’t open hood on their BMW, but accept 1000$  hammers, price arrived at by government approved pricing methods  . ( probably originally made in china for 2$) 
Further all these companies are large , they cannot risk a crash and lawsuit over brake cylinders .
We would not have any brake cylinders at all without this source . 


On Jul 7, 2024, at 11:26 PM, Carl Bilter <cbilter@xxxxxxxxx> wrote:


That is correct.  10mm bleeders.  Centric, Dorman, Dynamic et. al. all made in China.  

Carl B. 

------ Original Message ------
From "Henry A. Mitchell III" <hamlll@xxxxxxxxxxxxxx>
To "'Lindsey'" <lindsey@xxxxxxxxxxxxxxx>; "'Nick Taylor'" <nicksgaragesd@xxxxxxxxx>
Date 7/7/2024 9:30:02 PM
Subject RE: {Chrysler 300} 1960 brake parts

Raybestos is made in China and has metric bleeders.

 

Henry Mitchell

       300C

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Lindsey
Sent: Sunday, July 07, 2024 5:41 PM
To: Nick Taylor <nicksgaragesd@xxxxxxxxx>
Cc: chrysler 300 club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 1960 brake parts

 

Did you have the phone and ask for Raybestos? Their site only shows Dynamic Friction and Centric.

 

Sent from my iPad



On Jul 7, 2024, at 6:47PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:



I just got a full set of Raybestos wheel cylinders and master cylinder from rock auto. They all installed without issue and look much better than the Centric ones used on the last project car. Getting ready to bleed the system but need to finish the fuel system resto before I can drive the car. 

 

On Sun, Jul 7, 2024, 11:13AM Lindsey Fuller <Lindsey@xxxxxxxxxxxxxxx> wrote:

It appears there are no difference in wheel cylinders for the '60 lineup. Given various comments about quality of parts generally, does anyone have comments on supplies from the many vendors out there?

Thks

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAOdyVVb7seCaQ3JFc3LiRX7JSTvOGKeqgS2s-K6f62cxCgbjLQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/E105C3E1-E767-44B3-8B21-8DE4CBC96EB6%40fullerfamily.ca.


Virus-free.www.avast.com

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/000001dad0de%24c0500e00%2440f02a00%24%40mindspring.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/ema205f038-c704-4cb0-a6a7-7fddcc530b38%40c8c01f36.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/D8AACDDC-6AC3-4D1F-B2CA-C540BA482606%40gradyresearch.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.