Re: {Chrysler 300} 1960 brake parts

[Lindsey Fuller <lindsey@xxxxxxxxxxxxxxx>]

Thks Nick, I had certainly looked at their site.

Sent from my iPhone

On Jul 7, 2024, at 6:47 PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:



I just got a full set of Raybestos wheel cylinders and master cylinder from rock auto. They all installed without issue and look much better than the Centric ones used on the last project car. Getting ready to bleed the system but need to finish the fuel system resto before I can drive the car. 

On Sun, Jul 7, 2024, 11:13 AM Lindsey Fuller <Lindsey@xxxxxxxxxxxxxxx> wrote:

It appears there are no difference in wheel cylinders for the '60 lineup. Given various comments about quality of parts generally, does anyone have comments on supplies from the many vendors out there?

Thks

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAOdyVVb7seCaQ3JFc3LiRX7JSTvOGKeqgS2s-K6f62cxCgbjLQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/887146CE-42E7-42D0-AD1E-9F841BB83351%40fullerfamily.ca.