RE: {Chrysler 300} Alternator removal

Pull up and move side to side while pulling. It will lift off. May be tight, but it will give up as long as you don't.

-----Original Message-----
From: "mguarneri via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Friday, July 5, 2024 12:13pm
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} Alternator removal

I am trying to remove the alternator from my G ('64 version) and replace it with a '61 version that I just had rebuilt. The trouble is I cannot remove the current alternator.

The bottom bracket will not allow me to just lift it off. I noticed that the '61 has a sleeve in the alternator screw hole facing the firewall. Just wondering if this is causing it not to come off. Is there a "trick" to get this alternator off?

Thanks....John

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1946205128.1430610.1720196034881%40mail.yahoo.com.