You use clip nuts on the radiator. One from the top and one from the bottom.
Hi Folks
I feel like I’m crazy for asking about this since it should be very easy: I want to install a fan shroud I got from Murray on our non A/C 22”
radiator F. I thought it would be fairly straightforward as the radiator yoke in the car has the provisions for the shroud attachment, and the shroud has the tabs to attach to the yoke brackets.
The problem is that there is very little clearance to install nuts and bolts in those backets and they appear so close to the radiator to collar I’m wondering if there was some sort of blind bracket or some other means of enabling the tabs on the shroud to mate with the brackets on the radiator frame?
I’ve attached a few pics - any help would be greatly appreciated!
Best
Keith
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/857A6A60-413D-45FD-9A3A-6F58A99F685B%40yahoo.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/857A6A60-413D-45FD-9A3A-6F58A99F685B%40yahoo.com.
Attachment:
20240624_200316.jpg
Description: JPEG image
Back to the Home of the Forward Look Network
Archive Sitemap
