I thought that QQD can do it if you send them your old one for the steel frame. I took mine and used a lot of both tube and spray liquid rubber and rebuilt mine.
That said, one can get air seepage around the column even when they were new. I know someone who took the metal ring, removed all the rubber, and then had a leather boot made for it with a lace up for the
last two inches at the column. They then used some closed cell foam to make a ring around the column and then laced it tight. Seal very well.
I may do the same at some time on mine as even after re-working mine, I am still getting some air.
James
My research has not come up with finding the interior rubber dust shield that is at the base of the steering column at the floor, has anyone found a source?
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/CAHChH_0avaJGMg-rgcZ0BN1RFNdwg2ami2e%3Dp8AHGK%2B73-HcyA%40mail.gmail.com.