Re: {Chrysler 300} 1964 300 engine bay

[Harry Torgeson <torg66@xxxxxxxxx>]

I found the fasteners, and ordered them.

Thanks

Harry

On Thu, Jun 13, 2024 at 11:26 PM Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx> wrote:

If the fasteners you refer to are anything like the staples used for the 57s, they are really quite easy to make from a spool of wire. Same for the hood seal over the radiator core support. Give me a call and I’ll talk to you about it.

Keith Boonstra

616–450–5428

On Thu, Jun 13, 2024 at 1:11 PM Harry Torgeson <torg66@xxxxxxxxx> wrote:

Hi all, I need fasteners to attach the rubber splash aprons, they cover the front suspension.

Thanks

Harry Torgeson

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAHChH_3Ji6AqjZPBiJaKLNCJRptP9%3DRR8GT4QJL0a92w4AJz1g%40mail.gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAHChH_1LhV5vKzVt5%2B9agopte0my6U1X%2Bvz54G-tccO2rzwwZA%40mail.gmail.com.