Anyone?
I think I need a ¼ inch OD O-ring on this, but try finding one that is rated for freon…
Anyone relaced this and know what they used and know that it does not leak?
James
From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Sunday, June 9, 2024 11:20
To: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx) <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} A/C Valve bulb sensor seal.
Hi all,
I am working through all the seals. I have a NOS expansion valve I am installing and there is an issue. The bulb seems to have an odd O-ring or is using a “square O-ring or the old O-ring took a square shape.
In any case it is smaller than 1/8 inch and does not show up, at least I could not find it, in the master parts book.
Anyone know what the proper type and size of ring goes on this part? See photos.
Thanks, James.
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171EEE4494F7CFC88DE529F93C52%40CY5PR19MB6171.namprd19.prod.outlook.com.
Back to the Home of the Forward Look Network
Archive Sitemap