{Chrysler 300} Wheel Cylinder Sleeve
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Wheel Cylinder Sleeve



Hi all, hope you are all doing well. I have a bad wheel cylinder on a 62 300 to deal with. I had a set of good replacements in my parts stash but my basement was flooded with 5 feet of water and now they are no longer usable. I was thinking about sending them out to whitepost or similiar to be sleeved. I remember my uncle having some issues with them on different occasions and just wondering if anyone had any input on having this done, is it worth it, and where to have it done if I was to do it.

Thanks for the wealth of information I recieve from the club. Its very helpful.


--

 

photo

 
 
 

Drew Carl
Owner, eScore 

Phone: 724-288-6636

Email: Drew@xxxxxxxxxxxx

Website: www.escoremx.com

Address: 523 Westland Rd. Hickory PA 15340

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/8231c2b2-67a2-4e18-9b60-79218bb7fde0%40escoremx.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.