Re: {Chrysler 300} Generator Rebuild

I live in NH and had my '56 generator rebuilt about 10 yrs ago by a local guy who has a very small shop and works alone. My armature was shot and before rebuilding it asked if I wanted him to install sealed bearings. I jumped on this because I had in the past over oiled the front and had to clean it up before getting to work.

It's Auto Electric 183 Route 25 Brentwood NH 603-642-5990. His turnaround time was about 2 weeks. Since I am about 30 min from his shop, I dropped it off and picked it up. I've sent others to him so I know he is still in business.

John

In a message dated 2/6/2024 11:31:58 PM Eastern Standard Time, jebirr@xxxxxxxxx writes:

Any recommendations on where I can get my 300-F generator rebuilt?

I've located a number of rebuilders online including Pro Rebuilders, Luna, Kaestner, and North Star but wouldn't mind a reference.

Also if anybody has had any experience with "Gener-Nator" conversions would be interested to hear about it.

Thanks,

Jim

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/2146cee1-3400-4c81-b6f2-56baef025271n%40googlegroups.com.