This outfit made the pistons for both my 413’s that live in my ’62 300-H & ’62 NY Wagon.--They were about a grand for the set, which included the Pistons, Pins, Clips & Rings.They may not have old cars pictured on their website; but they make fine pistons….I don’t recall the turnaround, even though it was earlier this year, as I didn’t care how soon they were made.But I want to say (ballpark) 4 to 6 weeks at the most.Matt AllynOn Dec 8, 2023, at 3:53 PM, 'Mwl1967' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:Looking for feedback on having pistons made for my 413 (finally found a block that passed magnaflux). What companies have you guys used and what was the turnaround, quality and price?Thanks,Mike Laiserin--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/867236325.2225504.1702079601347%40mail.yahoo.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/F46A8ACB-4505-4E65-9318-DBC2C27AF9C9%40yahoo.com.