{Chrysler 300} trim question 1963 1964

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hi all,

 

I vaguely remember that on one of my parts cars in the 1980’s there was a stainless steel flat trim part that went from the back window header rail (under it) then down onto the painted part of the body between the belt stainless and the outside rear window weatherstrip. It was formed to the angle and come down about 2 inches.

 

My current car does not have it, nor did my old 300K hardtop, I think I fished it out of the pars car and used it.

 

Does anyone know what I am talking about?

 

James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171DA395F9C239FD2F8E28D9381A%40CY5PR19MB6171.namprd19.prod.outlook.com.