Re: {Chrysler 300} 300F license plate light removal

[rob bohuslav <sonoramic413@xxxxxxxxx>]

NIck, 

Im in the middle of disassembling my '65 Plymouth Satellite for paint, and had the same problem. Yeah, its just going to get similar phillips, or allen stainless screws. 

Rob

On Tue, Nov 28, 2023 at 5:22 PM Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

The license plate light uses anti-theft screws to hold it in. I assume it's because it's right below the trunk lock. 

Are people replacing them with new ones or just regular screws? Regular screws with nylocks would probably be as secure.

Thanks, Nick

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFPXTT%2BXrx0qppdXD4iX8urvdHEn%3DrJrC4DeALBOS3tuLQ%40mail.gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAGQfsuHg7BF8OT%3DCJmKdTomQNb5opXa_e6hKFW6f-0qKqp%3D-2w%40mail.gmail.com.